PF-300 Floater A

1 1/4 Width    2″ Height    1 1/2 Rabbet

Designed for canvas paintings and prints to present the canvas as floating within the picture frame.

 

  • Your Art Size

    Enter only the size of the items you are loading into the frame. (We will add an "allowance" of an additional 1/16 inch along each edge so the framing components can drop easily into the recess. You Do NOT need to figure this into your measurements.) How to measure for a picture frame

  • inches
  • inches

Description

Floater Picture frames are designed for canvass paintings and prints and are designed to present the canvas as floating within the picture frame. The Floater frame profile illustrated is Poplar and has been painted Black with General Finishes Black Gel Stain. Floater Picture Frames are in Poplar only.

When measuring art for presentation in a floater frame, take note of 3 dimensions, the height, width and thickness of the stretched canvas or panel.

Floater frames are cut to the size of the artwork unless otherwise specified. With standard floaters, to achieve the effect of the art floating within the walls of the frame, add 1/4″ to the width and height of the artwork when determining the frame size. This will give you a 1/8″ space between the edges of the artwork and the walls of the frame.

With stepped-floaters most of the spacing is provided by the step but not all. These frames will also be cut to the size specified, ie., the size of the art, so you may find it a tight fit unless you add a little wiggle room. Add 1/8″ to each dimension (that is 1/16″ along each edge) to insure an adequate fit.

Be advised, stretched canvases can warp slightly, so measure dimensions at the corners for the most accurate sizing.

Canvas in Floater Front to back, the surface of the art can be flush with the face of the frame or be recessed in it from 1/8 to 1/4 – inch. Although the thickness of stretched canvas varies widely, the most common thicknesses are ¾” and 1-1/4”. Floater frames with depths from 7/8” to 1” would work well for a thickness of ¾”. Floater frames with depths from 1-3/8” to 1-1/2” would work well for a thickness of 1-1/4”.

Note: Custom cut floater frames are not refundable for error in measurements. Please take care in measuring.

 

Additional information

Weight 6.0 oz
Dimensions 60 × 4 × 4 in

Reviews

There are no reviews yet.

Be the first to review “PF-300 Floater A”

Your email address will not be published. Required fields are marked *