Assembly Instructions

You will receive four miter-cut frame sections and four plastic pegs. Lay the sides and the plastic pegs on a flat surface for assembly.

Step 1

You will receive four miter-cut frame sections and four plastic pegs. Place the frame sides and the plastic pegs on a flat surface for assembly

Step 2

Select the two opposite sides and place a drop or wood glue on each miter. Turn the frame sides over so the miter slot is on top, align the miter slots, join the two and gently tap the plastic peg into the miter slot rounded point down. Align the frame miters if needed and set aside while you perform the same assembly on the opposite sides.

Step 3

With the two opposite sides assembled, place a drop of glue on the other two miters, gently tap the plastic wedges into the frame and align the miters if necessary. Place a strap clamp around the frame and tighten until dry. your picture frame is assembled and ready to stain or paint.